Wir fahr'n Nach England!
Moderatoren: Admins, Moderatoren
- Glücki
- Lästerfix
- Beiträge: 3862
- Registriert: Fr Jul 14, 2006 08:05
- Postcode: 29389
- Country: Germany
- Wohnort: Bad Bodenteich
Hey - looks great - but what's about Karin - she
isn't on the foto - i don't remember that she is blond - that girl
must be closey's daughter.
The weather seams fine too - looks better than here.
Greats to all of them
isn't on the foto - i don't remember that she is blond - that girl
must be closey's daughter.
The weather seams fine too - looks better than here.
Greats to all of them
Glücki
Jeder Mensch bereitet uns auf eine gewisse Art Vergnügen. Der Eine,
wenn er ein Zimmer betritt, der Andere, wenn er es wieder verläßt!
Jeder Mensch bereitet uns auf eine gewisse Art Vergnügen. Der Eine,
wenn er ein Zimmer betritt, der Andere, wenn er es wieder verläßt!
- closey
- Ferryfix & iron butt
- Beiträge: 1872
- Registriert: Do Jul 13, 2006 21:52
- Postcode: 10117
- Country: Germany
- Wohnort: Spennymoor, England
Babsi, Ginger & Thomas, Karin war Schlafen. Sie war sehr müde von trip. The blonde ist unser Tochter, Victoria.
Heute das Wetter ist toll, Regen, Gewitter und Sonne. Wir machen unser Tours in Autos.
Durham City
Sonne ....
und Gewitter...
Karin & Gado try to stay dry
Gestern wir ein schön Tour gemacht.
The highest pub in England, The Tan Hill Inn.
Carsten mit neu Freund
OK I am going back to the party/barbecue, i have an appointment with a few beers
Closey
Heute das Wetter ist toll, Regen, Gewitter und Sonne. Wir machen unser Tours in Autos.
Durham City
Sonne ....
und Gewitter...
Karin & Gado try to stay dry
Gestern wir ein schön Tour gemacht.
The highest pub in England, The Tan Hill Inn.
Carsten mit neu Freund
OK I am going back to the party/barbecue, i have an appointment with a few beers
Closey
Zuletzt geändert von closey am Mo Jun 25, 2007 21:04, insgesamt 1-mal geändert.
- closey
- Ferryfix & iron butt
- Beiträge: 1872
- Registriert: Do Jul 13, 2006 21:52
- Postcode: 10117
- Country: Germany
- Wohnort: Spennymoor, England
Hoagie, i was cruising at 60mph when i suddenly lost the drive from the engine. No crunch or bang, the engine works fine, the clutch works and the gears change but the G does not move!
Back at Kennys garage we took out the back wheel, the bevels and drive shaft are ok. We took off the front bevel box and all is ok. All splines and teeth look ok.
We are beginning to suspect some damage in the gearbox but first we will check the clutch. I will report further when i find out what has gone wrong.
Closey
Back at Kennys garage we took out the back wheel, the bevels and drive shaft are ok. We took off the front bevel box and all is ok. All splines and teeth look ok.
We are beginning to suspect some damage in the gearbox but first we will check the clutch. I will report further when i find out what has gone wrong.
Closey
Hi Joe,closey hat geschrieben:Back at Kennys garage we took out the back wheel, the bevels and drive shaft are ok. We took off the front bevel box and all is ok. All splines and teeth look ok.
have you looked to part 40 + 10 too?
http://www.gsx1100g.net/forum/viewtopic ... sc&start=0
CU
Frank
- Glücki
- Lästerfix
- Beiträge: 3862
- Registriert: Fr Jul 14, 2006 08:05
- Postcode: 29389
- Country: Germany
- Wohnort: Bad Bodenteich
Hello Joe,
i think, that must be the parts 40 + 10, if i hear your problems.
At our last "Schraubertag" with Meikel in May we have had a look at
4 bikes. The cardan shaft from "Baggerbob" and Fraro were o.k.
But the two from "Wossi" and mine was very very very bad.
To change it will cost about 160 Euro and half an hour -
if you have the wright tools. You'll need a impact screwdriver.
I also change my clutch this year - probs with the clutch sounds
different.
Thomas
http://www.pixum.de/int/img.php?u=mail_ ... rcslaves=0
picture shows my cardan shaft
i think, that must be the parts 40 + 10, if i hear your problems.
At our last "Schraubertag" with Meikel in May we have had a look at
4 bikes. The cardan shaft from "Baggerbob" and Fraro were o.k.
But the two from "Wossi" and mine was very very very bad.
To change it will cost about 160 Euro and half an hour -
if you have the wright tools. You'll need a impact screwdriver.
I also change my clutch this year - probs with the clutch sounds
different.
Thomas
http://www.pixum.de/int/img.php?u=mail_ ... rcslaves=0
picture shows my cardan shaft
Glücki
Jeder Mensch bereitet uns auf eine gewisse Art Vergnügen. Der Eine,
wenn er ein Zimmer betritt, der Andere, wenn er es wieder verläßt!
Jeder Mensch bereitet uns auf eine gewisse Art Vergnügen. Der Eine,
wenn er ein Zimmer betritt, der Andere, wenn er es wieder verläßt!
-
- Schraubfix
- Beiträge: 1588
- Registriert: Fr Jul 14, 2006 09:11
- Postcode: 22119
- Country: Germany
- Wohnort: Hamburg
- Kontaktdaten: